36‑Inch Free‑Standing Vanity

A 36‑inch free‑standing vanity is a self‑supporting cabinet unit designed for commercial washrooms where wall mounting is impractical or undesirable. Its footprint measures 914 mm wide, typically 550 mm deep, and 800 mm high, allowing it to accommodate a standard undermount or vessel sink while providing accessible storage beneath the countertop.

Technical Specifications

The unit is engineered to withstand a uniformly distributed load of 150 kg on the countertop surface, verified through static testing per ANSI/BIFMA X5.5. Edge sealing employs a 2‑mm PVC band that resists water ingress, achieving a moisture absorption rate below 0.5 % after 24 h immersion. All panels are sanded to a surface roughness of Ra ≤ 0.8 µm before finishing, ensuring consistent adhesion of coatings.

Material Options

Core panels are available in three substrate grades: 18‑mm marine‑grade plywood (cross‑banded, phenol‑formaldehyde bonded), 19‑mm moisture‑resistant MDF (urea‑formaldehyde reduced, wax‑emulsified), and 1.2‑mm stainless‑steel clad composite for high‑impact zones. Each substrate receives a factory‑applied UV‑cured acrylic topcoat with a hardness of 2H (pencil scale) and a gloss level of 30 ± 5 %

Standard Dimensions

Customization Choices

• Finish: matte, satin, or high‑gloss acrylic; custom color matching to RAL or NCS standards.
• Hardware: soft‑close drawer slides (30 kg load rating), concealed hinges, or push‑to‑open mechanisms.
• Integrated Features: LED strip lighting (12 V, 5 W/ft), USB charging ports, or antimicrobial surface additive.
• Accessories: side panels, backsplash panels (6 mm thick), or adjustable shelf brackets.
• ADA Compliance: optional front‑approach clearance of 900 mm and height adjustment to 860 mm.

Typical Applications

In hospitality environments, the free‑standing configuration eliminates the need for structural wall reinforcement, reducing installation time by approximately 30 % compared with wall‑hung units. Healthcare facilities benefit from the seamless edge sealing, which facilitates cleaning protocols and reduces microbial harborage. Office complexes appreciate the modular design, allowing reconfiguration of restroom layouts without demolishing fixed cabinetry.

Quality Control Philosophy

Each batch undergoes dimensional verification using calibrated CMM stations, with acceptance criteria of ±2 mm on linear dimensions and ±0.5 mm on diagonal squareness. Finish adhesion is tested via cross‑hatch tape test (ASTM D3359) requiring a minimum rating of 4B. Load testing applies 150 kg for 10 minutes; any permanent deflection exceeding 1 mm triggers material review.

Packaging & Shipping

Units are shipped flat‑packed in triple‑wall corrugated cartons with internal corner protectors made of recycled polyethylene foam. A humidity‑barrier wrap (≤ 5 % RH transmission) safeguards the finish during transit. Palletized loads consist of 12 units per pallet, secured with PET strapping and stretch film, meeting ISPM‑15 standards for international shipments.

Frequently Asked Questions

Next Steps

To discuss your specific requirements or obtain a detailed quotation, please contact our technical sales team.