B2B White Gloss Wall Hung Bathroom Cabinet
Inquire Now
White Gloss Wall Hung Bathroom Cabinet – B2B Specification
This wall‑hung cabinet is designed for commercial bathroom installations where moisture resistance, dimensional stability, and a seamless gloss finish are required. The unit is supplied ready for fixation to stud walls or concrete substrates using concealed metal brackets.
Construction and Materials
The cabinet carcass consists of 18 mm thick, Class E1 moisture‑resistant MDF with a density of 680 kg/m³. All panels are edge‑sealed with 0.5 mm PVC edge banding to prevent water ingress at the cut faces. The interior shelves are 16 mm thick, laminated with a melamine overlay that meets EN 14322 standards for abrasion resistance.
Dimensional Standards
| Parameter | Typical Value | Unit | Notes |
|---|---|---|---|
| Overall Width | 600 | mm | Standard module; customizable in 50 mm increments |
| Overall Height | 800 | mm | Includes 100 mm plinth clearance |
| Overall Depth | 200 | mm | Meets ADA reach range for wall‑hung units |
| Door Thickness | 18 | mm | Matches carcass thickness for uniform appearance |
| Gloss Level (60°) | 85±5 | GU | Measured per ASTM D523 |
| Water Absorption (24 h) | <0.5 | % | Tested per EN 12087 |
Surface Finish Performance
The exterior faces receive a two‑coat UV‑cured acrylic system. Primer thickness is 20 µm, topcoat 35 µm, yielding a total film weight of approximately 55 g/m². The coating provides a gloss level of 85 GU (±5) and a scratch resistance rating of 2H (pencil hardness).
Accelerated weathering (QUV‑A, 8 h UV / 4 h condensation) shows ΔE<2 after 500 h, confirming colour stability under typical bathroom lighting and humidity cycles.
Mounting and Installation
Each cabinet includes two concealed steel brackets rated for a safe working load of 150 kg per pair. Brackets attach to the cabinet via pre‑drilled 8 mm clearance holes and to the substrate using M6 × 50 mm anchor bolts (for concrete) or No. 10 × 45 mm wood screws (for studs).
Installation tolerance allows ±3 mm vertical adjustment via slotted bracket holes, ensuring alignment with adjacent fixtures. The unit is shipped with a drilling template and torque‑specified fastener kit.
Typical Applications
- Hotel guest bathrooms requiring coordinated vanity suites
- Healthcare facility patient toilets where chemical‑resistant surfaces are mandated
- High‑traffic commercial wash‑rooms in airports and convention centers
- Luxury apartment building common‑area restrooms
- Retail store fitting rooms with matching wall‑hung storage
Quality Assurance
Every production lot undergoes dimensional verification (±1 mm on width, height, depth) using calibrated CMM. Gloss uniformity is checked across five points per door with a gloss meter; acceptable variation is ≤3 GU.
Adhesion of the UV coating is validated by cross‑hatch test (ASTM D3359) requiring a minimum rating of 4B. Edge‑seal integrity is confirmed by water‑spray test (EN 12405) with no delamination after 24 h exposure.
Final inspection includes a functional load test where the cabinet is subjected to 125 kg static load for 10 minutes; permanent deformation must remain under 0.5 mm.
Customization Options
Width, height, and depth can be adjusted in 50 mm increments to suit project layouts. Door configurations include single‑leaf, double‑leaf, or sliding variants with soft‑close hinges rated for 50,000 cycles.
Interior accessories such as adjustable glass shelves, stainless‑steel towel bars, and integrated LED lighting strips are available upon request. Custom colour matching to RAL or NCS standards can be achieved by altering the topcoat pigment concentration.
All customizations are supported by revised CAD models and updated installation drawings before production release.
Frequently Asked Questions
Can dimensions be customized?
Yes. Width, height, and depth are adjustable in 50 mm increments; custom lengths require a new tooling quote.
What information is required before quotation?
Project layout drawings, required finish (gloss level or matte), hardware preferences, and delivery destination.
What materials are available for the carcass?
Standard is moisture‑resistant MDF (E1). Alternatives include PVC‑coated particleboard or marine‑grade plywood for extreme humidity environments.
How is quality inspected?
Dimensional checks, gloss uniformity, adhesion (cross‑hatch), edge‑seal water resistance, and load testing are performed on each batch.
What packaging methods are available?
Flat‑packed in double‑wall corrugated cartons with corner protectors, or fully assembled in wooden crates for high‑vibration transport.
Contact for Technical Inquiry
For further details, request a quotation, or obtain installation drawings, please reach out to our technical sales team.
Related Products
Related News
custom closet spatial organization and material performance analysis
Bathroom Taps Technical Analysis
