Freestanding White Gloss Bathroom Cabinets

Engineers select these units for environments where moisture resistance and a seamless aesthetic are critical. The core consists of 18 mm MDF bonded with a melamine‑impregnated overlay that resists swelling under prolonged humidity exposure.

Material Construction

The panel core meets EN 622‑5 standards for moisture resistance, exhibiting a thickness swelling of less than 5 % after 24 h immersion. A decorative HPL layer is bonded using a hot‑press process at 150 °C and 9 bar pressure, ensuring delamination resistance above 1.2 MPa.

• Core density: 680 kg/m³ ± 10 %
• HPL thickness: 0.8 mm
• Edge sealing: PVC‑free hot‑melt adhesive, 0.5 mm bead

Surface Finish and Gloss Level

The white gloss finish is achieved through a UV‑cured clear coat applied over the HPL decorative layer. Measured gloss at 60° angle averages 85 GU, with a uniformity tolerance of ± 3 GU across the panel surface.

Coat hardness exceeds 2H on the pencil scale, providing resistance to scratching from typical bathroom accessories. The coating also exhibits a chemical resistance rating of Class 2 according to ISO 2812‑1, tolerating occasional contact with mild cleaning agents.

Dimensional Flexibility

Standard modules are offered in three widths to accommodate common bathroom layouts while maintaining structural integrity. Each module incorporates a cam‑lock fastening system that allows on‑site adjustment of shelf height within a 25 mm increment.

• Width options: 400 mm, 500 mm, 600 mm
• Height: 800 mm (fixed)
• Depth: 350 mm (fixed)
• Shelf adjustment range: 100 mm to 600 mm from base

Load Capacity and Hardware

Load testing follows ANSI/BIFMA X5.1 standards for storage units. Results are summarized in the table below.

Typical Applications

These cabinets are specified for hotel guest bathrooms, healthcare facility washrooms, and high‑traffic commercial restrooms where frequent cleaning cycles demand a non‑porous, easy‑to‑maintain surface. The white gloss finish reflects ambient lighting, improving perceived space without requiring additional fixtures.

Quality Assurance

Each production lot undergoes incoming material verification, in‑process checks, and final product audit. Verified attributes include core moisture content, HPL adhesion strength, and gloss uniformity.

• Moisture content: 4 % ± 0.5 % (oven‑dry method)
• HPL peel strength: ≥ 1.5 N/mm (ASTM D903)
• Gloss variation: ≤ 3 GU across 1 m² area
• Visual inspection: 100 % surface defect check under 500 lux illumination

Customization Options

Beyond the standard white gloss, the product line accommodates alternative finishes and dimensional adjustments to meet project‑specific requirements.

• Finish: matte, satin, or custom colour HPL (minimum order quantity applies)
• Height: 700 mm to 900 mm in 50 mm increments
• Depth: 300 mm to 400 mm in 25 mm increments
• Hardware: soft‑close hinges, push‑to‑open mechanisms, or lockable latches
• Accessories: integrated LED lighting strips, internal power outlets

Frequently Asked Questions

Can dimensions be customized?

Yes. Width, height, and depth can be adjusted within the ranges listed above; custom sizes require a new tooling quote and extended lead time.

What information is needed for a quotation?

Provide required dimensions, finish selection, hardware preferences, quantity, and delivery destination. Optional accessories should be listed separately.

Which materials are available for the core?

Standard core is moisture‑resistant MDF. Alternatives include marine‑grade plywood or particleboard with moisture barrier, available upon request.

How is quality inspected before shipment?

Finished units undergo visual gloss inspection, load verification on a sample basis, and functional hardware testing. AQL level II is applied for cosmetic defects.

What packaging methods protect the gloss finish?

Each cabinet is wrapped in low‑static polyethylene foam, placed in a corrugated cardboard sleeve, and secured on a pallet with corner protectors. Edge guards prevent surface abrasion during transit.

Get in Touch

For technical data sheets, sample requests, or project‑specific inquiries, contact our engineering team.