Blue Freestanding Bathroom Cabinet

This cabinet is designed as a self‑supporting storage unit for wet environments, combining structural rigidity with a finish that resists humidity and frequent cleaning. The freestanding configuration eliminates the need for wall anchoring, simplifying installation in retrofit or new‑build projects.

Design and Dimensions

The unit consists of a rectangular carcass with a recessed base plinth that raises the cabinet off the floor, protecting it from standing water. Standard overall dimensions are 600 mm wide, 450 mm deep, and 850 mm high, providing a usable interior volume of approximately 210 liters.

Materials and Construction

The carcass is fabricated from 18 mm moisture‑resistant MDF core, faced with a high‑pressure laminate (HPL) in a blue‑tone finish that meets EN 438‑2 standards for surface wear and chemical resistance. All edges are sealed with PVC edge banding (2 mm) to prevent water ingress.

The cabinet incorporates a full‑extension drawer system on concealed ball‑bearing slides rated for 30 kg dynamic load per drawer. The drawer fronts are attached via dowel‑and‑cam fasteners, allowing removal for service without damaging the carcass.

Performance Characteristics

Load testing shows the carcass can sustain a uniformly distributed static load of 150 kg on the top surface without deflection exceeding 2 mm. The HPL surface demonstrates a Taber abrasion resistance of ≤ 50 mg loss after 1000 cycles under CS‑10 wheels.

Applications

Freestanding cabinets are advantageous in bathroom layouts where wall studs are inaccessible or where tenants require non‑permanent fixtures. The unit’s self‑supporting base allows placement against tiled walls without drilling, preserving waterproof membranes and reducing installation time.

In commercial settings such as hotels or healthcare facilities, the cabinet’s chemical‑resistant surface withstands frequent disinfectant wiping, while the concealed drawer system provides secure storage for toiletries and linens.

Customization Options

• Alternative widths: 500 mm, 700 mm, 800 mm (depth and height unchanged)
• Choice of HPL colours: standard blue, grey, white, or wood grain finishes
• Drawer configuration: single full‑height drawer, two‑drawer stack, or open shelving
• Optional integrated LED strip with motion sensor (12 V DC, IP44)
• Alternative base plinth heights: 50 mm, 100 mm, or recessed casters for mobility

Quality Assurance

Each cabinet undergoes a three‑stage inspection: (1) raw material verification for MDF density and HPL adhesion, (2) dimensional check of carcass and drawer gaps using calibrated gauges, and (3) functional test of drawer slides and load capacity on a sample basis. Non‑conforming items are reworked or scrapped before packaging.

Packaging consists of a five‑wall corrugated carton with corner protectors and a polyethylene moisture barrier, designed to withstand ISTA 3A transit standards.

Frequently Asked Questions

Contact for Quote

To discuss your project requirements, request a detailed quotation, or obtain samples, please reach out via our contact form.