Product Overview

A free standing vanity unit combines a countertop basin with supporting cabinetry in a single, self‑supported structure. Designed for high‑traffic commercial restrooms, the unit eliminates the need for wall‑mounted brackets, simplifying installation in facilities where substrate strength is uncertain or where rapid reconfiguration is required.

The bulk offering refers to production runs of ten or more units, enabling consistent dimensional tolerances and finish uniformity across large projects such as airports, manufacturing plants, and hospitality complexes.

Technical Specifications

Material Options

The vanity structure can be fabricated from three primary material families, each selected for specific performance attributes:

• 304 Stainless Steel: provides corrosion resistance in humid environments, ease of cleaning, and a brushed finish that hides minor scratches.
• Solid Surface (Acrylic‑based): offers seamless joints, non‑porous surface, and the ability to integrate the sink bowl without visible seams.
• Vitreous China: delivers a classic ceramic appearance with high compressive strength and chemical resistance to common cleaning agents.

Material thickness varies by selection: stainless steel panels are typically 1.2 mm, solid surface cores are 12 mm thick, and vitreous china bodies are 8 mm thick at the rim.

Dimensional Flexibility

Units are produced on a modular platform that allows width adjustment in 100 mm increments without redesigning the support frame. This flexibility accommodates varying restroom layouts while maintaining a consistent aesthetic line.

Height adjustment is achieved via threaded leveling legs with lock nuts, providing up to 25 mm of vertical travel to compensate for uneven floor surfaces. The legs are manufactured from hardened steel with a zinc‑plated finish to prevent corrosion.

Depth remains constant at 550 mm to ensure adequate clearance for standard P‑traps and supply lines, simplifying plumbing rough‑in across multiple units.

Applications in Industrial Facilities

Industrial environments demand fixtures that withstand frequent cleaning, exposure to cleaning chemicals, and occasional physical impacts. The free standing design eliminates reliance on wall anchorage, which can be compromised in buildings with lightweight partitions or retrofit projects.

Stainless steel variants are particularly suited for food‑processing plants where wash‑down cycles are routine, while solid surface options are favored in pharmaceutical facilities requiring seamless, non‑porous surfaces to prevent microbial harborage.

The integrated sink bowl reduces the number of joints, minimizing potential leak points and simplifying maintenance schedules for facility engineers.

Customization Capabilities

Beyond standard dimensions, the following options are routinely accommodated:

• Integrated backsplash heights ranging from 100 mm to 200 mm, with optional radius edges for easier cleaning.
• Alternative faucet configurations including single‑hole, widespread, or sensor‑activated units, with corresponding hole patterns.
• Accessory cutouts for soap dispensers, hand dryers, or paper towel holders, positioned per customer layout drawings.
• Finish choices: brushed satin, mirror polish, or powder‑coated RAL colors for stainless steel; matte or gloss gels for solid surface.

All custom features are engineered to maintain the original load rating and dimensional tolerances, verified through finite‑element analysis prior to tooling.

Quality Assurance Process

Each production lot undergoes a three‑stage inspection protocol:

1. Incoming material verification – chemical composition for stainless steel, resin content for solid surface, and water absorption for vitreous china.
2. In‑process checks – dimensional measurement of critical features (width, height, faucet hole locations) using calibrated CMMs with a tolerance of ± 0.5 mm.
3. Final functional testing – load application of 150 kg for five minutes, water tightness test at 0.5 bar pressure, and surface finish assessment per ISO 4287.

Non‑conforming items are segregated and reworked or scrapped according to the severity of the deviation, ensuring that only units meeting the defined specification leave the facility.

Packaging and Logistics

Units are packed flat‑packed to optimize container utilization. Each vanity is wrapped in 150 µm polyethylene film, placed on a single‑wall corrugated tray, and secured with polypropylene strapping. Corner protectors of expanded polystyrene prevent edge impacts during handling.

A standard pallet holds ten units, with a total pallet weight not exceeding 1 200 kg. Pallets are stretch‑wrapped and labeled with barcodes that include SKU, lot number, and QR code linking to the digital inspection record.

For overseas shipments, the packaging conforms to ISPM‑15 standards for wood‑free materials, eliminating the need for fumigation or heat treatment.

Frequently Asked Questions

Can dimensions be customized?

Yes. Width adjustments are available in 100 mm increments, height can be altered via leveling legs within a ± 25 mm range, and depth remains fixed at 550 mm to maintain plumbing compatibility.

What information is required before quotation?

Required details include desired overall width, material preference, faucet hole configuration, any accessory cutouts, finish specifications, and the delivery destination for freight estimation.

How is quality inspected?

Inspection comprises incoming material verification, in‑process dimensional checks using CMMs, and final functional testing for load, water tightness, and surface finish.

What packaging methods are available?

Standard packaging consists of polyethylene film wrap, corrugated tray, polypropylene strapping, and EPS corner protectors, palletized for efficient handling.

What is the typical production lead time?

Lead time ranges from four to six weeks after receipt of approved drawings and material confirmation, depending on order size and current factory load.

Request for Quotation

To obtain a detailed quote, please provide the project specifications outlined above. Our technical team will review the requirements and return a formal proposal within two business days.