Bulk Wall Hung Mirrored Tall Bathroom Cabinets

These cabinets are tall, vertical storage units designed to be mounted directly onto structural walls, featuring full-length mirrored doors that provide both storage and reflective surface area. Each

Inquire Now

Description

Bulk Wall Hung Mirrored Tall Bathroom Cabinets

These cabinets are tall, vertical storage units designed to be mounted directly onto structural walls, featuring full-length mirrored doors that provide both storage and reflective surface area. Each unit is engineered for repeated use in commercial environments where floor space is limited and hygiene requirements are strict.

Wall‑hung installation eliminates the need for floor‑standing frames, allowing the cabinet to transfer its load through concealed anchors into the wall studs or masonry. This configuration reduces the overall footprint by up to 40 % compared with freestanding tall cabinets of equivalent volume.

Typical load ratings are based on the anchoring system: each unit can safely support a uniformly distributed load of 150 kg on the interior shelves, with the mirrored door assembly rated for dynamic forces up to 50 N during normal opening and closing cycles.

Key Technical Specifications

The following table lists nominal dimensions and performance values that can be adjusted to match project‑specific requirements. All values are presented as typical ranges; exact figures are confirmed during the quotation stage.

Parameter	Typical Range	Notes
Overall Height	1800 mm – 2200 mm	Customizable in 50 mm increments
Width (single door)	400 mm – 600 mm	Double‑door modules available up to 1200 mm
Depth (including door)	200 mm – 250 mm	Door protrusion adds ~15 mm
Shelf Thickness	18 mm	Moisture‑resistant particleboard, density 650 kg/m³
Mirror Thickness	4 mm – 6 mm	Silver‑backed, safety‑film coated
Load Capacity per Shelf	150 kg (UDL)	Tested per EN 14074
Door Opening Angle	110° ±5°	Concealed hinge system

Material Construction

Core panels are fabricated from moisture‑resistant medium density fiberboard (MR‑MDF) with a minimum density of 650 kg/m³ and a formaldehyde emission class of E0. Edge sealing uses PVC‑free hot‑melt adhesive to prevent water ingress.

Alternative substrates include marine‑grade plywood (5‑ply, 12 mm thick) for environments with intermittent water exposure, and reinforced aluminum frames for applications requiring higher corrosion resistance.

MR‑MDF core – standard for most hotel and office restrooms
Marine plywood – suited for spa areas with frequent splashing
Stainless steel reinforcement – optional for high‑humidity industrial washrooms

Mounting and Installation

Each cabinet is supplied with a pre‑drilled mounting plate that aligns with standard 16‑inch stud spacing or metric 600 mm modular grids. The plate distributes shear forces across four M10 anchor bolts, each rated for a tensile capacity of 25 kN.

Installation requires a level substrate; shims of up to 3 mm thickness may be used to compensate for wall irregularities. After anchoring, the mirrored door is hung on concealed soft‑close hinges that limit impact force to less than 20 Nm.

Customization Options

Because projects often demand specific dimensions, finishes, or hardware, the product line supports a range of configurable parameters. All customizations are reviewed for structural integrity before production.

Height adjustment in 50 mm steps (up to 2400 mm)
Width modules combinable to 1800 mm total
Finish options: matte laminate, UV‑coated acrylic, or powder‑coated metal frame
Integrated LED strip lighting (12 V, 5 W per linear meter)
Locking mechanisms: cam lock, electronic keypad, or RFID

Quality Assurance

Every unit undergoes a three‑stage inspection: raw material verification, in‑process dimensional check, and final functional test. The functional test includes 5000 opening/closing cycles, load‑deflection measurement of shelves under 150 kg, and mirror adhesion verification via tape‑pull test (minimum 1.5 MPa).

Documentation provided with each shipment includes material safety data sheets, installation instructions, and a certificate of conformity to EN 14749 for kitchen furniture, which is referenced for bathroom cabinets due to similar moisture resistance requirements.

Applications in Commercial Settings

In hotels, these cabinets provide guests with secure storage for toiletries while the full‑length mirror supports grooming tasks, reducing the need for separate wall mirrors and thereby simplifying cleaning routines. The vertical orientation keeps the floor clear for housekeeping carts.

Healthcare facilities benefit from the easy‑to‑clean surfaces and the ability to mount the cabinet at a height that complies with ADA reach ranges (maximum 1200 mm from floor to top of shelf). The mirrored surface assists patients with visual checks without requiring additional fixtures.

Educational institutions install these cabinets in dormitory bathrooms where space is at a premium; the lockable version protects personal items, and the mirrored door eliminates the need for a separate mirror that could be vandalized.

Frequently Asked Questions

Can the dimensions be customized to match existing wall studs?: Yes. Height and width can be adjusted in 50 mm increments to align with standard stud spacing or custom grid layouts.
What information is required before a quotation can be issued?: Project‑specific dimensions, preferred substrate material, finish type, hardware choices, and quantity are needed to generate a detailed quote.
Which materials are available for high‑humidity environments?: Marine‑grade plywood, MR‑MDF with enhanced edge sealing, and optional stainless‑steel reinforcement are offered for areas with persistent moisture.
How is quality inspected before shipping?: Each cabinet passes material verification, dimensional checks, and a functional test that includes 5000 door cycles, shelf load testing, and mirror adhesion measurement.
What packaging methods are available for export shipments?: Units are packed in double‑wall corrugated cartons with corner protectors, palletized, and stretch‑wrapped; optional wooden crates are available for high‑value orders.