Selecting a mirror cabinet for wet environments requires understanding material behavior under constant humidity and temperature swings. The following details explain the engineering choices that affect longevity, safety, and ease of maintenance.

The cabinet frame uses extruded aluminum alloy 6063 with a wall thickness of 1.2 mm, providing a tensile strength of approximately 210 MPa and resistance to corrosion in chloride‑rich atmospheres.

Door panels consist of 6 mm tempered glass that meets EN 12150‑1 impact resistance, offering a fracture pattern that reduces injury risk. The glass edges are polished and sealed with a silicone gasket rated for continuous exposure to water.

Internal shelving is made from 18 mm melamine‑faced particleboard with a moisture‑resistant rating of MR‑3, limiting swelling to less than 0.5 % after 24 h immersion.

Bathrooms experience cyclic humidity changes that can cause wood‑based products to warp or delaminate. The aluminum frame’s low thermal expansion coefficient (≈ 23 × 10⁻⁶ /K) minimizes dimensional change, while the MR‑3 shelving limits moisture uptake.

IP44 rating ensures that water jets from showerheads do not penetrate the enclosure, protecting internal electrical components such as LED lighting or demister pads.

The tempered glass doors provide a clear view with a surface hardness of 6–7 Mohs, resisting scratches from cleaning agents.

Each unit undergoes a dimensional inspection using calibrated CMMs, verifying tolerances within ±0.5 mm for critical mating surfaces.

Glass panels are subjected to a pendulum impact test per EN 12600, confirming classification 1(C)1 for safe breakage.

Final assembly is checked for IP44 compliance via a standardized spray test, ensuring no water ingress after 5 minutes of exposure.

Can dimensions be customized? Yes, height, width, and depth can be adjusted in 50 mm steps to suit specific wall studs or niches.

What information is required for a quotation? Provide rough opening measurements, desired finish, glass options, and any electrical accessories.

How are products protected for export? Units are packed in double‑wall corrugated cartons with corner protectors, sealed with moisture‑barrier film, and palletized for safe handling.

For detailed technical datasheets, sample requests, or project‑specific inquiries, please reach out using the link below.