China 24 Inch Bathroom Cabinet

A 24‑inch wide bathroom cabinet is a common solution for tight spaces where storage must be balanced with clearance for fixtures. In China manufacturing, these units are typically produced from

Inquire Now

Description

24 Inch Bathroom Cabinet – China Manufactured

A 24‑inch wide bathroom cabinet is a common solution for tight spaces where storage must be balanced with clearance for fixtures. In China manufacturing, these units are typically produced from engineered wood panels with moisture‑resistant coatings to meet the humidity demands of bathrooms. The following sections detail the dimensional, material, and performance characteristics that procurement engineers evaluate when specifying this product.

Key Technical Specifications

Parameter	Typical Value / Range
Overall Width	600 mm (24 in)
Overall Height	800 mm – 900 mm (standard)
Cabinet Depth	200 mm – 250 mm (including door)
Door Thickness	18 mm engineered board
Shelf Thickness	16 mm engineered board
Core Material	MDF or particleboard, density 650‑750 kg/m³
Surface Finish	Melamine laminate, PVC edge banding, optional water‑based PU coating
Hinge Type	Concealed soft‑close, rated for 50 000 cycles
Load Capacity (per shelf)	15 kg uniformly distributed
Water Resistance Rating	IPX4 (splash proof) when edges sealed

Material Selection and Construction

The core panel is usually medium‑density fibreboard (MDF) with a density around 700 kg/m³, providing sufficient stiffness for a 600 mm width while keeping weight manageable. Edge sealing is applied with a 0.5 mm PVC band that prevents water ingress at the cut faces. The melamine laminate surface offers a hard, wear‑resistant layer with a typical abrasion rating of 150 cycles (Taber). Optional polyurethane topcoat adds a further barrier against cleaning agents.

Design Features for Bathroom Environments

To cope with high humidity, the cabinet incorporates a rear ventilation gap of 10 mm that allows air circulation behind the unit, reducing condensation on the back panel. The door hinge is concealed and includes a soft‑close damper that limits impact force to under 2 N·s, prolonging hinge life. All internal corners are radiused to a minimum of 2 mm to avoid sharp edges that could trap moisture.

Installation and Mounting

Mounting brackets are supplied as steel Z‑clips with a 3 mm thickness, designed to attach to wall studs or solid backing. The recommended clearance above the cabinet is 50 mm to accommodate lighting or ventilation fans. Leveling screws integrated into the base allow adjustment of ±3 mm to compensate for uneven floors.

Applications in Commercial and Residential Projects

In residential renovations, a 24‑inch width fits comfortably between a sink and a toilet, providing storage for toiletries without encroaching on traffic paths. In hotels or assisted‑living facilities, the same dimension enables modular repetition along a corridor, creating uniform storage pods that simplify replacement and maintenance. The cabinet’s weight, typically under 12 kg, permits handling by a single installer, reducing labor time.

Quality Control Process

Dimensional inspection is performed on each panel using a laser scanner, with tolerances held to ±0.5 mm for width and height. Finish adhesion is verified by a cross‑hatch test per ASTM D3359, requiring a rating of 5B or better. Hinge endurance is validated through 50 000 cycle testing at 10 cycles per minute, after which door alignment must remain within 1 mm of the original position.

Customization Options

Finish colors: white, gray, beige, navy, or custom RAL matches.
Door styles: slab, shaker, or raised panel with optional glass insert.
Interior layout: fixed shelf, adjustable shelf, or pull‑out tray.
Hardware upgrades: soft‑close hinges, push‑to‑open mechanisms, or magnetic catches.
Dimensions: width adjustable in 50 mm increments, height adjustable in 100 mm steps.