China Wall Hung Bathroom Vanity Unit with Sink

The unit is designed to be mounted directly to a reinforced wall stud or concrete substrate, eliminating the need for a floor‑standing cabinet and providing clear access underneath for plumbing and cleaning.

Key Technical Characteristics

Overall dimensions are typically 600 mm wide × 460 mm deep × 550 mm high, with a sink bowl depth of 180 mm to accommodate standard faucet heights. The mounting bracket is fabricated from 2 mm cold‑rolled steel, tested to a static load of 250 kg per side without permanent deformation.

Material Construction

The vanity body can be produced from three primary substrates, each selected for specific performance attributes such as impact resistance, chemical stability, and weight.

Design Variants

The sink bowl can be integrated as a top‑mount, under‑mount, or vessel style, each affecting the required countertop thickness and edge treatment.

• Top‑mount: sink rim sits on the countertop, requiring a 20 mm minimum thickness for support.
• Under‑mount: sink is fixed beneath the countertop, demanding a waterproof seal and a 25 mm thick substrate.
• Vessel: bowl sits above the countertop, necessitating a reinforced mounting plate and a 30 mm high backsplash.

Installation & Mounting

A concealed steel bracket is anchored to the wall using M10 expansion bolts spaced at 300 mm intervals, providing a shear capacity of 3 kN per bolt. The unit includes a pre‑drilled hole pattern for the faucet and drain, aligned to ISO 20637 standards for basin outlets.

Typical Applications

In commercial restrooms where floor space is at a premium, the wall‑hung layout facilitates rapid mopping and reduces trip hazards. Healthcare facilities benefit from the seamless underside, which eliminates crevices that can harbor pathogens and simplifies disinfection protocols.

Quality Assurance

Each unit undergoes a three‑stage inspection: dimensional verification with a CMM (±0.2 mm tolerance), surface finish assessment using a gloss meter (target 70 ± 5 GU), and a hydrostatic test of the sink assembly at 0.5 MPa for 5 minutes to confirm leak‑free joints.

Customization Logic

Clients may specify alternative bracket materials such as stainless steel grade 304 for corrosive environments, or request integrated LED lighting channels with a 12 V DC driver, which adds approximately 150 mm to the overall depth.

Packaging & Shipping

The vanity is packed in a double‑wall corrugated crate with internal foam corners, rated for a stacking load of 800 kg. Each crate includes a moisture barrier film and is labeled with handling symbols per ISPM‑15 for international shipments.

Lead Time & Sampling

Standard production lead time is 25 working days after receipt of approved drawings and material confirmation. Sample units are available within 10 working days, shipped via express courier with tracking.

Frequently Asked Questions

Can the dimensions be customized to match specific rough‑in measurements?

Yes, width and depth can be adjusted in 50 mm increments, subject to structural validation of the mounting bracket.

What information is required before a quotation can be issued?

Please provide the intended substrate material, sink style, faucet hole layout, and any required accessories such as towel bars or lighting.

Which material options are available for the vanity body?

Solid surface, vitreous china, and high‑pressure laminate over particleboard are standard; alternative composites are available upon request.

How is quality inspected before shipment?

Dimensional checks, surface gloss measurement, and hydrostatic leak testing are performed on every unit, with records retained for traceability.

What packaging methods are available for export shipments?

Standard export packaging includes a double‑wall crate with foam protection; additional palletization or heat‑treated wood crating can be arranged.

Get in Touch

To discuss project‑specific requirements or request a formal quotation, please contact our technical sales team.