An oval bathroom mirror cabinet combines a recessed storage compartment with a frameless oval mirror, providing both functional storage and a space‑enhancing visual element. The geometry reduces sharp corners, easing cleaning and improving safety in wet environments.

Cabinet depth typically ranges from 100 mm to 150 mm, allowing accommodation of toiletries while maintaining a shallow profile suitable for narrow wall studs. The mirror thickness is usually 5 mm tempered glass, meeting EN 12150‑1 standards for impact resistance.

Mounting is achieved through concealed zinc‑alloy brackets rated for a static load of 25 kg, ensuring stability even when the cabinet is fully loaded. Electrical provisions for LED lighting or defogger pads can be integrated via a rear‑mounted conduit with IP44 rating.

Materials and Construction

The cabinet carcass is constructed from 18 mm moisture‑resistant MDF with a melamine finish, providing a water vapor transmission rate below 0.5 g/(m²·24 h) as per ASTM E96. Edge sealing uses PVC tape with a Shore A hardness of 85 to prevent delamination.

Mirror backing consists of a silver nitrate reflective layer followed by a protective copper layer and a double‑coated epoxy paint, yielding a reflectance of 88 % across the visible spectrum and corrosion resistance exceeding 500 hours in salt spray testing (ASTM B117).

Hardware includes stainless‑steel (A2) hinges with a 110° opening angle and soft‑close dampers rated for 50,000 cycles. All fasteners are passivated to resist galvanic corrosion in humid conditions.

Functional Features

• Integrated LED strip (12 V, 5 W/m) with diffuser, providing 300 lx illuminance at the mirror surface.
• Optional demister pad (24 V, 40 W) with auto‑shutoff after 30 minutes to prevent overheating.
• Internal adjustable glass shelves (6 mm thick) with chrome‑plated brackets, allowing 25 mm vertical increments.
• Soft‑close door mechanism reduces impact noise to below 45 dB(A).
• Ventilation slots (2 mm width) at the rear promote air circulation, limiting condensation buildup.

Typical Applications

In hospitality bathrooms, the oval form factor reduces visual bulk while offering sufficient storage for guest amenities, supporting a sleek, modern aesthetic that aligns with brand guidelines for upscale hotels.

Healthcare facilities benefit from the seamless, crevice‑free interior, which simplifies cleaning protocols and reduces microbial harborage, meeting infection control requirements for patient wards.

Residential renovations often select this cabinet for powder rooms where wall stud spacing limits depth; the shallow profile accommodates standard 2×4 framing without compromising storage capacity.

Quality Control Philosophy

Each production lot undergoes dimensional verification using a coordinate measuring machine (CMM) with a tolerance of ±0.2 mm on mirror oval axes and ±0.5 mm on cabinet depth.

Mirror adhesion is tested via a cross‑hatch tape test (ASTM D3359) requiring a rating of 5B (no removal) after 24 hours of humidity exposure at 40 °C/90 % RH.

Electrical components receive an insulation resistance test (>10 MΩ) and a leakage current check (<0.5 mA) before final packing, ensuring compliance with IEC 60598‑1 for luminaires.

Final inspection includes a functional cycle test of 5,000 open‑close operations on the door mechanism, confirming that soft‑close dampers maintain closing speed within 0.2 ± 0.05 seconds.

Customization Options

• Mirror dimensions: major axis 400 mm–800 mm, minor axis 250 mm–500 mm, adjustable in 10 mm increments.
• Cabinet depth: 80 mm, 100 mm, 120 mm, 150 mm options.
• Interior finishes: melamine white, matte gray, or natural wood veneer.
• Lighting color temperature: 3000 K (warm), 4000 K (neutral), 6000 K (cool) with dimming capability.
• Additional accessories: magnetic strip for metal accessories, internal power outlet (USB‑A/USB‑C).

Frequently Asked Questions

• Can dimensions be customized? Yes, both mirror oval axes and cabinet depth are adjustable per project requirements; provide rough opening dimensions for a quotation.
• What information is required before quotation? Wall opening width and height, desired mirror size, preferred interior finish, and any electrical options (lighting, demister, outlets).
• What materials are available for the carcass? Standard is moisture‑resistant MDF with melamine; alternative options include marine‑grade plywood or PVC‑coated particleboard upon request.
• How is quality inspected? Dimensional checks, adhesion testing, electrical safety tests, and functional cycle tests are performed on each batch as outlined in our QC protocol.
• What packaging methods are available for export? Cabinets are packed in double‑wall corrugated cartons with corner protectors, wrapped in polyethylene film, and sealed with strapping; palletization is available for LCL/FCL shipments.
• What is the typical production lead time? Standard configurations ship within 15‑20 working days after receipt of approved drawings and deposit; customized orders may extend to 25‑30 working days.

Ready to Discuss Your Project?

Submit your specifications, including opening dimensions, desired mirror size, and any required electrical options, to receive a detailed quotation and lead‑time estimate.