Factory Price Bathroom Wall Hung Storage Cabinet

Overview

A wall hung storage cabinet is mounted directly to the wall, freeing floor space and simplifying cleaning in wet environments. It provides enclosed storage for toiletries, towels, and cleaning supplies while keeping the bathroom layout uncluttered.

The cabinet is built from moisture‑resistant substrate with a minimum thickness of 18 mm to resist swelling and warping. Edge sealing with PVC or ABS prevents water ingress at panel joints, extending service life in high‑humidity conditions.

Key Technical Attributes

• Substrate thickness: 18 mm (marine‑grade plywood or MR‑MDF)
• Edge protection: 0.5 mm PVC band, sealed with hot‑melt adhesive
• Shelf load capacity: 30 kg uniformly distributed load (tested per EN 14749)
• Finish: melamine laminate with surface abrasion resistance ≥ 150 cycles (Taber)
• Mounting hardware: zinc‑plated steel brackets, 4 mm screws, rated for 5 kN shear

Design and Construction

The cabinet employs a concealed French‑cleat system that transfers load to the wall studs, minimizing point loads on drywall. Each bracket incorporates a safety lip that prevents accidental disengagement under overload.

Interior shelves are adjustable in 25 mm increments using steel pins that lock into pre‑drilled holes, allowing reconfiguration without tools. The door (if included) uses soft‑close hinges with a damping coefficient of 2.5 N·s/m to reduce impact noise.

All metal components receive a zinc‑nickel plating with a minimum thickness of 8 µm to resist corrosion in chloride‑laden atmospheres typical of bathrooms.

Technical Specifications

Applications

Wall hung cabinets are selected for bathrooms where floor space is at a premium, such as en‑suite suites, compact urban apartments, and healthcare facilities. The elevated installation simplifies mopping and reduces the risk of water damage to the cabinet base.

In hospitality projects, the cabinets support a clean aesthetic while providing secure storage for guest amenities. The ability to match finishes to existing wall tiles or vanity tops allows seamless integration into the interior design scheme.

Customization Options

• Dimensions: width 400‑1200 mm, height 500‑900 mm, depth 150‑300 mm
• Substrate: MR‑MDF, marine plywood, particleboard with melamine overlay
• Finish: melamine, HPL, PVC foil, UV lacquer, natural veneer
• Door configuration: single, double, sliding, or open shelving
• Hardware: soft‑close hinges, push‑to‑open, lockable catches, integrated lighting
• Color: RAL or NCS standards, custom color matching upon request

Quality Assurance

Each unit undergoes dimensional verification with a tolerance of ±2 mm on width, height and depth. Load testing is performed on a representative sample, applying 1.5× the rated shelf load for 10 cycles to confirm permanent deformation remains under 0.5 mm.

Finish adhesion is checked via cross‑hatch tape test (ASTM D3359) requiring a minimum rating of 4B. Water resistance is validated by submersion of edge samples for 24 hours, followed by visual inspection for delamination or swelling.

Contact for Inquiry

To request a quotation, discuss custom dimensions, or obtain technical data sheets, please use the link below. Our engineering team will respond with a detailed proposal including lead time, packaging options, and compliance documentation.

Request a Quote / Technical Discussion