Free Standing Double Single Sink Vanity

A free standing double single sink vanity is designed to accommodate two separate washbasins within a single cabinet frame. The unit is self-supporting, requiring no wall mounting, and is typically installed in commercial restrooms, hospitality suites, or high‑traffic public facilities.

Technical Specifications

Overall dimensions are commonly 1200 mm wide, 560 mm deep, and 850 mm high, though each dimension can be adjusted in 50 mm increments to suit site constraints.

The cabinet provides two symmetrically placed sink cutouts, each 450 mm in diameter, spaced 300 mm apart center‑to‑center. Structural rigidity is achieved with an 18 mm thick moisture‑resistant MDF core and a full‑height rear stretcher that resists deflection under load.

Load testing shows the vanity can sustain a uniformly distributed weight of 150 kg on the countertop without permanent deformation. Drawer and door hardware are specified with soft‑close mechanisms rated for 40 kg dynamic load per slide, ensuring smooth operation over 50,000 cycles.

Materials and Construction

The cabinet panels consist of 18 mm MDF with a density of 650 kg/m³, surfaced with a 0.3 mm melamine laminate that resists moisture and chemical exposure.

All exposed edges are sealed with 2 mm PVC edge banding to prevent water ingress. Internal reinforcements include a 30 mm × 30 mm steel bracket at each corner, welded to the MDF via inserts, providing additional shear resistance.

Installation Requirements

Installation requires a level floor with a tolerance of ±3 mm over the vanity footprint.

The unit is secured using four M10 anchor bolts through pre‑drilled base plates, each rated for a shear capacity of 5 kN.

Plumbing connections are accessed via a removable rear panel that provides 100 mm clearance for trap and supply lines.

Applications

In hospitality environments, the free standing configuration allows rapid reconfiguration of guestroom layouts without structural modifications.

Healthcare facilities benefit from the seamless, easy‑to‑clean surfaces and the ability to install antimicrobial laminate options.

Educational institutions select this vanity for its vandal‑resistant construction and compatibility with standard ADA height guidelines when the countertop is set at 860 mm.

Industrial workshops use the unit as a wash station where chemical resistance and load capacity are critical.

Quality Assurance

Each vanity undergoes dimensional inspection using a coordinate measuring machine (CMM) with a tolerance of ±0.5 mm on critical dimensions.

Surface finish is evaluated for gloss uniformity, targeting a minimum of 70 GU at 60° angle.

Final assembly includes a functional test of all drawers and doors, verifying smooth operation and proper alignment before packaging.

Customization Options

• Overall width (800 mm – 1800 mm)
• Depth (450 mm – 650 mm)
• Sink cutout shape and size (round, rectangular, custom)
• Laminate finish (solid color, wood grain, high‑gloss, antimicrobial)
• Hardware upgrades (soft‑close, push‑to‑open, lockable)

Frequently Asked Questions

Contact for Inquiry

For further technical details or to request a quotation, please contact our engineering team.