Oem 60 Inch Bathroom Vanity Double Sink

A 60‑inch wide vanity accommodates two undermount sinks with a central clearance of at least 4 inches between basin edges, allowing simultaneous use without interference. The overall depth is

Inquire Now

Description

OEM 60 Inch Bathroom Vanity Double Sink

A 60‑inch wide vanity accommodates two undermount sinks with a central clearance of at least 4 inches between basin edges, allowing simultaneous use without interference.

The overall depth is typically 22 inches from wall to front edge, providing sufficient countertop space for toiletries while fitting standard bathroom layouts.

Technical Specifications

Parameter	Typical Value	Adjustable Range
Overall Width	60 in (1524 mm)	±2 in (custom)
Depth (wall‑to‑front)	22 in (559 mm)	20‑24 in
Height (including countertop)	34‑36 in (864‑914 mm)	Adjustable via leg levelers
Sink Bowl Diameter (each)	18 in (457 mm) round or 16×12 in (406×305 mm) rectangular	Customer‑specified
Countertop Thickness	1.25 in (32 mm) solid surface or quartz	1‑2 in options

Materials and Construction

Cabinet carcass is constructed from 18‑mm thick, moisture‑resistant MDF with a PVC‑laminated finish that meets ISO 12944‑5 corrosion resistance for humid environments.

Drawer sides use 12‑mm plywood with full‑extension, soft‑close ball‑bearing slides rated for 45 kg dynamic load per slide.

The countertop is bonded to the cabinet using a two‑part polyurethane adhesive with a shear strength of ≥2.5 MPa, ensuring long‑term adhesion under cyclic temperature changes.

Design and Dimensions

The vanity features a recessed toe‑kick of 4 in height and 3 in depth, providing clearance for floor‑mounted plumbing and improving ergonomics.

Side panels include pre‑drilled ½‑inch mounting holes spaced at 16‑inch intervals for secure wall anchoring, complying with ASTM F2090 load requirements.

Optional integrated LED strip lighting (12 V, 5 W/ft) can be routed inside the toe‑kick cavity, delivering uniform illumination with an IP65 rating.

Customization Options

Sink configuration: dual undermount, top‑mount, or vessel styles; bowl materials include vitreous china, stainless steel, or solid surface.
Countertop edge profiles: eased, beveled, ogee, or waterfall; thickness selectable from 1 in to 2 in.
Cabinet finish: matte, gloss, textured laminate, or veneer; color matched to RAL or Pantone specifications.
Hardware upgrades: soft‑close hinges, push‑to‑open mechanisms, or stainless‑steel pulls rated for 100 000 cycles.
Accessory integration: built‑in soap dispensers, towel bars, or electrical outlets with GFCI protection.

Applications

In hospitality settings, the dual‑sink layout reduces queue times during peak check‑in periods, supporting a minimum of 2 users per minute based on typical hand‑washing cycles.

For multi‑family residential projects, the vanity’s modular carcass allows rapid installation via knock‑down panels, cutting on‑site labor by approximately 15 % compared with site‑built units.

Commercial restrooms benefit from the integrated toe‑kick lighting, which meets IESNA RP‑8‑14 recommendations for vertical illuminance of 150 lux at the sink plane.

Quality Control and Testing

Each unit undergoes a 48‑hour humidity soak test at 90 % RH and 38 °C to verify laminate adhesion and swelling <0.2 % dimensional change.

Drawer slide endurance is validated with 50 000 open‑close cycles at 20 kg load, exceeding the BHMA Grade 1 requirement of 25 000 cycles.

Countertop impact resistance is assessed using a 5‑lb steel ball drop from 24 in height; acceptable units show no cracking or delamination.

Packaging and Shipping

Units are packed in double‑wall corrugated cartons with ¼‑inch polyethylene foam corner protectors, providing a compressive strength of at least 150 psi.

Internal bracing includes 2‑inch wood cleats that limit flex to <0.5 in under a 500 lb stacked load, meeting ISTA 3A standards for packaged goods.

Palletized shipments accommodate up to 12 units per 48‑inch × 40‑inch pallet, with a maximum gross weight of 2 500 lb per pallet.

Frequently Asked Questions

Can dimensions be customized?

Yes, width, depth, and height can be adjusted within the ranges indicated in the specification table; custom tooling may be required for deviations beyond ±2 in.

What information is required before quotation?

Provide the desired overall dimensions, sink bowl type, countertop material, finish color, and any accessory integrations (e.g., lighting, outlets).

What materials are available for the cabinet body?

Standard is moisture‑resistant MDF with PVC laminate; optional upgrades include marine‑grade plywood, polypropylene composite, or solid wood veneer.

How is quality inspected?

Incoming raw materials are checked for thickness and moisture content; in‑process checks verify adhesive cure and slide alignment; final audit includes functional operation and visual inspection per AQL 1.0.

What packaging methods are available?

Standard is knock‑down flat‑pack with foam corners; fully assembled crating is available for high‑vibration transport upon request.

How are export shipments protected?

Cartons are sealed with polymer‑strap bands and marked with humidity indicators; pallets are stretch‑wrapped and corner‑boarded to prevent shifting.

What is the typical production lead time?

Lead time ranges from 4 to 6 weeks for standard configurations; custom finishes or accessories may extend the schedule by 1‑2 weeks.

How are samples arranged?

Sample units can be shipped via express courier; the customer covers freight and any applicable duties, with a refundable sample fee upon order confirmation.