Overview

Freestanding grey bathroom cabinets are supplied as OEM units for integration into residential and hospitality projects. The design emphasizes dimensional stability under typical humidity fluctuations found in wet environments.

Each unit is delivered knock‑down or pre‑assembled according to project logistics, with mounting hardware optional for floor‑standing installation.

Material Composition

Core panels are manufactured from moisture‑resistant MDF with a density of 680 kg/m³, meeting EN 622‑2 standards for interior use.

Surfaces receive a melamine laminate finish in RAL 7047 (light grey) offering abrasion resistance rated at 150 cycles under Taber testing.

Structural Design

The cabinet employs a cam‑lock joint system reinforced with steel brackets at each corner, providing a shear resistance of approximately 1.2 kN per joint under static load.

Internal shelving uses adjustable metal brackets spaced at 32 mm increments, allowing load distribution of up to 25 kg per shelf when uniformly loaded.

Dimensions and Load Capacity

Standard footprint options are presented below; custom lengths are achievable within ±5 mm tolerance through CNC cutting.

Customization Options

OEM buyers may specify alternate panel thicknesses, alternative melamine colours, or integrated LED lighting channels.

• Panel thickness: 16 mm, 22 mm, or 25 mm MDF
• Finish: RAL 7016 (anthracite grey), RAL 9003 (signal white), or wood‑grain laminate
• Hardware: soft‑close hinges, push‑to‑open mechanisms, or concealed handles
• Accessories: internal drawers, towel bars, or adjustable glass shelves

All customizations are subject to tooling lead times and minimum order quantities, which are quoted per project.

Typical Applications

Freestanding grey cabinets are specified in hotel guest rooms where floor‑standing units simplify retrofit without wall reinforcement.

In multi‑family housing, the cabinets provide a cost‑effective alternative to built‑in vanities, reducing on‑site carpentry labor by approximately 30 %.

Healthcare facilities select the moisture‑resistant finish for ease of cleaning and compliance with infection‑control guidelines.

Quality Assurance

Each production lot undergoes dimensional inspection using coordinate measuring machines, with tolerances held to ±0.5 mm on critical interfaces.

Surface adhesion is verified via cross‑hatch tape test (ASTM D3359) requiring a minimum rating of 4B.

Random samples are subjected to 48‑hour cyclic humidity testing (30 %–90 % RH at 30 °C) to confirm no delamination or swelling exceeding 0.2 %.

Packaging and Logistics

Units are packed in double‑wall corrugated cartons with internal corner protectors and polyethylene film to guard against moisture ingress during transit.

Standard pallet configuration holds 20 units per pallet (approx. 450 kg), facilitating containerized shipment.

Export packaging complies with ISPM‑15 standards for wood‑free materials, eliminating fumigation requirements.

Frequently Asked Questions

• Can dimensions be customized? Yes, width, depth, and height can be adjusted within ±5 mm using CNC routing; please provide exact specifications for quotation.
• What information is required before quotation? Required data includes desired dimensions, panel thickness, finish colour, hardware preferences, order quantity, and delivery destination.
• What materials are available? Base material is moisture‑resistant MDF; alternative substrates such as particleboard or plywood are available upon request.
• How is quality inspected? Dimensional checks, adhesion testing, and humidity cycling are performed on each batch; inspection reports can be supplied with shipment.
• What packaging methods are available? Standard corrugated cartons with corner protection; reusable plastic crates or foam‑lined pallets can be arranged for special handling.
• How are export shipments protected? Cartons are sealed with moisture‑barrier film and strapped to pallets; optional heat‑shrink wrapping is available for high‑humidity routes.
• What is the typical production lead time? Lead time ranges from 15 to 25 working days after drawing approval, depending on customization complexity and current capacity.
• How are samples arranged? Sample units can be produced within 7‑10 working days; shipping costs are borne by the requester unless otherwise agreed.

Contact for Inquiry

To discuss technical requirements, request a quotation, or arrange sample evaluation, please reach out via the contact form.