Oem Large Wall Mounted Bathroom Cabinet

These cabinets are engineered for high‑traffic commercial restrooms where wall space is limited and durability is paramount. They combine a rigid frame with moisture‑resistant panels to support

Inquire Now

Description

OEM Large Wall-Mounted Bathroom Cabinet

These cabinets are engineered for high‑traffic commercial restrooms where wall space is limited and durability is paramount. They combine a rigid frame with moisture‑resistant panels to support frequent use while maintaining a clean appearance.

Key Design Considerations

Load capacity is determined by the stud spacing and the gauge of the mounting brackets; typical designs accommodate up to 150 kg evenly distributed across the cabinet face. Depth is usually kept between 180 mm and 220 mm to allow sufficient clearance for fixtures while providing adequate storage volume.

Material Selection

Core panels are often constructed from marine‑grade plywood or high‑density fiberboard with a phenolic overlay, delivering a density of 600‑750 kg/m³ and swelling resistance below 2 % after 24 h immersion. Hardware such as hinges and handles is commonly supplied in 304 stainless steel to resist corrosion in humid environments.

Material	Density (kg/m³)	Moisture Resistance	Typical Thickness (mm)
Marine‑grade plywood	600‑650	Low swell (<2 %)	18‑22
HDF with phenolic overlay	700‑750	Very low swell (<1 %)	16‑20
Stainless steel frame (optional)	7800	Excellent	2‑3 (profile)

Customization Parameters

Overall height, width, and depth adjustable in 10 mm increments
Door configuration: single, double, or sliding panels
Internal layout: adjustable shelves, pull‑out bins, or fixed compartments
Finish options: melamine, laminate, or veneer with specified color codes
Hardware selection: soft‑close hinges, magnetic catches, or recessed handles

Mounting and Installation

The cabinet is secured via a steel cleat system that transfers load directly to wall studs; recommended fastener size is M6 × 50 mm wood screws with a minimum embedment of 40 mm into studs. For walls without studs at the desired locations, a load‑distributing backer board of 12 mm plywood is advised.

Quality Assurance

Dimensional inspection verifies that overall dimensions remain within ±2 mm of specified values. Finish adhesion is tested via cross‑hatch tape test per ASTM D3359, requiring a rating of 4B or better. Hinge endurance is typically validated through 50,000 cycle operations without measurable sag.

Typical Applications

Facilities such as hotels, airports, and healthcare centers benefit from the cabinet’s compact footprint and robust construction, which reduces the risk of damage from frequent cleaning cycles and heavy use. The wall‑mounted configuration also simplifies floor‑maintenance routines by keeping the cabinet clear of mopping equipment.

Ordering Information

To generate a quotation, provide the intended wall stud spacing, anticipated load per shelf, preferred panel material, and finish reference. Optional accessories such as integrated lighting or anti‑microbial coatings can be specified at this stage.