Recessed Bathroom Mirror Cabinet

A recessed bathroom mirror cabinet integrates a storage compartment with a reflective surface, mounted flush within the wall cavity to save floor space and maintain a clean profile. The cabinet frame

Inquire Now

Description

Recessed Bathroom Mirror Cabinet

A recessed bathroom mirror cabinet integrates a storage compartment with a reflective surface, mounted flush within the wall cavity to save floor space and maintain a clean profile.

Design and Construction

The cabinet frame is typically formed from extruded aluminum alloy with a wall thickness of 1.2 mm, providing rigidity while keeping weight under 3.5 kg for a 600 mm × 800 mm unit.

Frame: 6063‑T5 aluminum alloy, optional powder‑coat finish in white, matte black, or brushed nickel.
Door: 5 mm tempered glass with edge polishing, impact resistance ≥ 0.5 J.
Interior shelves: 12 mm moisture‑resistant MDF with melamine laminate, resistant to swelling.

Dimensional Specifications

Standard models are offered in widths from 500 mm to 1200 mm, heights from 600 mm to 900 mm, and a consistent recess depth of 100 mm to accommodate plumbing and wiring.

Dimension	Typical Range (mm)	Increment Options
Width	500 – 1200	50 mm steps
Height	600 – 900	50 mm steps
Depth (recess)	100 (fixed)	–
Door thickness	5	–

Installation Method

Installation requires a framed opening cut into the stud wall, with the cabinet secured using four corrosion‑resistant stainless steel brackets rated for a shear load of 150 N each.

Electrical provisions for integrated LED lighting or defogger pads are routed through a 20 mm diameter conduit located at the top rear of the cavity.

Environmental Protection

The assembly achieves an IP44 rating, protecting against splashing water from any direction, and the aluminum frame undergoes a chromate conversion coating followed by a powder‑coat layer with a salt‑spray endurance of 500 hours.

Applications

In hospitality settings, the flush mount eliminates protruding hardware that could snag linens, while the integrated LED provides consistent illumination for grooming tasks without additional fixtures.

Healthcare facilities benefit from the seamless surface that reduces microbial harborage points and the ease of cleaning with standard disinfectants.

Quality Control

Each unit undergoes a dimensional verification using a coordinate measuring machine with a tolerance of ±0.5 mm on width and height, and a glass impact test per EN 12150‑1 to confirm resistance to 0.5 J strikes.

Finish adhesion is assessed via a cross‑hatch tape test (ASTM D3359) requiring a minimum rating of 4B before packaging.

Customization Options

Available finishes include anodized aluminum in clear, bronze, or black, and powder‑coat colors matched to RAL standards.

Interior layouts can be configured with adjustable glass shelves, pull‑out trays, or integrated electrical sockets rated for 16 A at 230 V.

Optional accessories: anti‑fog film with a power consumption of 12 W per square foot, motion‑sensor LED strips delivering 300 lx at the mirror surface, and soft‑close hinges rated for 50 000 cycles.

Frequently Asked Questions

Can dimensions be customized? Yes, width and height can be adjusted in 50 mm increments within the standard range; special sizes are available upon request.

What information is required before quotation? Project drawings showing the required cutout, desired finish, and any integrated electrical options.

What materials are available? Frame: 6063‑T5 aluminum with optional powder‑coat; Door: 5 mm tempered glass; Shelves: moisture‑resistant MDF with melamine.

How is quality inspected? Dimensional checks, glass impact testing, finish adhesion, and functional tests of lighting/defogger.

What packaging methods are available? Units are packed in double‑wall corrugated cartons with corner protectors and polyethylene foam inserts; palletization available for bulk orders.

How are export shipments protected? Cartons are sealed with moisture‑barrier lining and subjected to ISTA 3A vibration testing prior to dispatch.

What is the typical production lead time? 3‑4 weeks for standard configurations; 6‑8 weeks for customized finishes or special accessories.

How are samples arranged? Sample units can be shipped via express freight; costs are credited against the first order.