Tall White Wall Mounted Bathroom Cabinets

These cabinets are engineered for vertical storage in wet environments, providing a minimum interior height of 1800 mm while occupying a wall footprint of no more than 400 mm × 350 mm. The design

Inquire Now

Description

Tall White Wall Mounted Bathroom Cabinets

Overview

These cabinets are engineered for vertical storage in wet environments, providing a minimum interior height of 1800 mm while occupying a wall footprint of no more than 400 mm × 350 mm. The design prioritizes moisture resistance through sealed panel edges and a surface finish that withstands repeated cleaning cycles.

Design and Construction

Each unit features a 18 mm thick core panel constructed from moisture‑resistant MDF with a PVC laminate overlay, delivering a uniform white appearance and a surface hardness of approximately 0.3 GPa. The cabinet frame incorporates a concealed steel mounting bracket rated for a static load of 120 kg, ensuring stability when fully loaded.

Interior shelves are adjustable in 25 mm increments, supported by nylon‑filled polymer pins that resist corrosion and maintain positioning under dynamic loads. Door hinges are concealed, soft‑close mechanisms rated for 50 000 cycles without performance degradation.

Material Options

Core: MR‑grade MDF, 18 mm thickness, density 650‑750 kg/m³
Surface: PVC laminate, gloss level 85 ± 5 GU, UV‑stabilized
Mounting bracket: Cold‑rolled steel, thickness 2.5 mm, powder‑coated white
Shelf pins: PA6‑filled nylon, diameter 6 mm, load capacity 15 kg per pin

Dimensions and Customization

Standard overall dimensions are 1900 mm (H) × 400 mm (W) × 350 mm (D), with a usable interior depth of 300 mm after accounting for panel thickness. Custom heights ranging from 1500 mm to 2200 mm are available upon request, with corresponding adjustments to shelf quantity.

Installation and Mounting

The cabinet is secured to the wall via four M8 anchor bolts inserted into pre‑drilled holes in the mounting bracket, distributing load across the studs or masonry anchors. A leveling system integrated into the bracket allows for ±3 mm vertical adjustment to compensate for wall irregularities.

Installation requires a minimum wall substrate strength of 15 MPa for concrete or 10 MPa for timber studs, ensuring the bracket’s rated load is not exceeded under typical bathroom usage.

Applications

These cabinets are suited for commercial restrooms, healthcare facilities, and hospitality environments where vertical space is limited and hygiene standards demand non‑porous, easy‑to‑clean surfaces. The sealed edges prevent moisture ingress, reducing the risk of swelling or delamination in high‑humidity cycles.

Quality Control

Each unit undergoes a 24‑hour humidity soak test at 90 % RH and 38 °C to verify dimensional stability, followed by a 500‑cycle door operation test to confirm hinge performance. Surface finish is inspected for gloss uniformity using a 60° gloss meter, with acceptance criteria of 80‑90 GU.

Typical Specifications

Parameter	Typical Value	Notes
Overall Height	1900 mm	Customizable 1500‑2200 mm
Overall Width	400 mm	Fixed
Overall Depth	350 mm	Includes door thickness
Core Thickness	18 mm	MR‑MDF
Shelf Load Capacity	15 kg per shelf	Uniformly distributed
Mounting Bracket Load	120 kg static	Steel, powder‑coated
Surface Gloss	85 ± 5 GU	PVC laminate
Door Hinge Cycle Life	≥50 000 cycles	Soft‑close, concealed

Frequently Asked Questions

Can dimensions be customized? Yes, height, width, and shelf spacing can be adjusted to project requirements; please provide exact measurements for quotation.
What information is required before quotation? Required details include overall dimensions, desired shelf quantity, wall substrate type, and any special finish or hardware preferences.
What materials are available for the core? Standard is moisture‑resistant MDF; alternative options such as marine‑grade plywood or PVC‑coated particle board are available upon request.
How is quality inspected? Each unit passes humidity soak, door cycle, and gloss uniformity tests before packaging.
What packaging methods are available? Units are packed in corrugated cardboard with corner protectors and stretch film; palletized options exist for bulk orders.
How are export shipments protected? Export crates include internal bracing and moisture‑barrier liners to meet ISPM‑15 standards.
What is the typical production lead time? Lead time ranges from 3‑5 weeks for standard configurations; customized orders may extend to 6‑8 weeks depending on material availability.