Overview

This unit is a recessed‑style storage enclosure designed for vertical installation on interior walls. It combines a flat‑panel mirror door with an interior compartment for holding pharmaceuticals, first‑aid supplies, or small instruments. The assembly is intended for environments where quick visual access and contamination control are required.

Construction & Materials

The cabinet body is formed from 0.8 mm cold‑rolled steel sheet, providing a rigid frame that resists deformation under typical load conditions. Surfaces receive a electrostatic powder‑coat finish in RAL 9010 (pure white) with a measured film thickness of 60–80 µm, offering corrosion resistance per ASTM D1654. The door incorporates a 3 mm tempered glass mirror, silvered on the rear surface and sealed with a polyurethane edge band to prevent moisture ingress. Hinges are stainless‑steel butt type, rated for 20 000 cycles at 90° opening.

Dimensions & Mounting

Functional Features

The door operates on a concealed pivot hinge allowing a 110° swing with a soft‑close damper that limits impact velocity to below 0.2 m/s, reducing wear on the mirror edge. Interior layout includes two adjustable polymer shelves, each perforated for 4 mm diameter dowels, providing 25 mm vertical increment steps. A 6 mm diameter vent slot near the top rear panel facilitates passive air exchange, limiting condensation buildup inside the enclosure.

Applications

• Hospital patient rooms – provides staff with immediate access to topical medications while maintaining a clean, non‑porous surface.
• Outpatient clinics – supports rapid retrieval of dressings and antiseptics during minor procedures.
• Research laboratories – stores small volume reagents and protective gloves where bench space is limited.
• Pharmacy compounding areas – offers secure, visible storage for controlled substances under visual supervision.

Quality & Compliance

Each cabinet undergoes a three‑stage inspection: dimensional verification using calibrated CMM (±0.1 mm tolerance), coating thickness measurement via magnetic induction gauge, and mirror adhesion test per ASTM D4541 (minimum 1.5 MPa). Production follows documented work instructions calibrated to ISO 9001‑aligned procedures, with traceability logs retained for 24 months.

Customization Options

• Alternative overall dimensions in 50 mm increments (height 400–900 mm, width 300–600 mm).
• Finish choices: antimicrobial powder coat, stainless‑steel #4 brush, or custom RAL colors.
• Locking mechanisms: cam lock, electronic keypad, or RFID‑enabled latch.
• Interior accessories: LED illumination strip (12 V, 150 lm), magnetic tool holders, or removable bins.
• Door configuration: single‑panel, double‑panel sliding, or bi‑fold.

Frequently Asked Questions

Can the cabinet be recessed into a wall stud cavity? Yes, the mounting brackets are designed for 2‑in‑by‑4‑in stud installation with a maximum inset depth of 30 mm.

What lead time should be expected for a standard white unit? Typical production is 10‑12 business days after receipt of approved drawings, subject to current capacity.

Is the mirror treated for anti‑fog properties? The standard mirror is untreated; an optional hydrophilic coating can be applied upon request to reduce fogging in high‑humidity environments.

What documentation is provided with shipment? Each unit includes a material test report, coating thickness certificate, and installation manual.

Contact for Quote

To discuss specific dimensions, finish, or accessory requirements, please reach out to our sales team.