China Custom Small Walk-In Closet

A small walk‑in closet is a compact storage system designed for residential or light‑commercial spaces where floor area is limited but organized clothing and accessory storage is required. The unit combines a framed structure, adjustable shelving, hanging rails, and optional drawers to maximize usable volume within a footprint typically ranging from 0.8 m² to 1.5 m².

Design Considerations

The primary design goal is to achieve sufficient load capacity for garments while maintaining a low overall height to fit under standard ceiling clearances. Structural members are sized based on uniform load assumptions of 30 kg per linear meter of hanging rail, with a safety factor of 1.5 applied to bolted connections.

Adjustability is achieved through a series of threaded inserts and cam locks that allow shelf positions to be changed in 25 mm increments without tools. This modularity supports reconfiguration as storage needs evolve.

Material Options

Customization Parameters

• Overall width: 600 mm to 1200 mm, adjustable in 50 mm steps
• Depth: 400 mm to 600 mm, standard 500 mm
• Height: 1800 mm to 2200 mm, ceiling‑dependent
• Number of hanging rails: 1 to 3, load‑rated per rail
• Shelf configuration: fixed, adjustable, or pull‑out baskets
• Drawer units: 0 to 2, widths 400 mm or 600 mm
• Accessories: integrated lighting, mirror panels, shoe racks

Typical Applications

In urban apartments where bedroom floor area is under 12 m², a small walk‑in closet provides a dedicated dressing zone without encroaching on living space. The vertical orientation of hanging rails makes use of otherwise unused wall height, while the shallow depth allows placement alongside a bed or desk.

For boutique hotels or serviced apartments, the unit offers guests a standardized storage solution that can be installed quickly during room refurbishment. The modular panel system enables replacement of damaged components without dismantling the entire closet, reducing downtime and maintenance cost.

Quality Assurance

Each frame undergoes a tensile test on a sample upright to verify yield strength ≥ 235 MPa before powder coating. Shear tests on cam lock assemblies confirm a minimum holding force of 150 N per lock under static load.

Finished units are inspected for dimensional tolerance: width ± 2 mm, depth ± 2 mm, height ± 3 mm. Surface coating is checked for adhesion using a cross‑hatch test (ASTM D3359) with a target rating of 5B.

Packaging and Shipping

Components are packed in flat‑pack cartons with corner protectors and polyethylene foam inserts. The frame, shelves, and hardware are segregated to prevent abrasion during transit. Each carton is labeled with a QR code linking to the assembly manual and part list.

For export shipments, cartons are stacked on pallets and secured with stretch film. A humidity indicator card is placed inside each master carton to monitor moisture levels during sea freight.

Lead Time and Sampling

Standard production lead time for a configured unit is 18‑22 working days after receipt of approved drawings and deposit. Sample units, typically a single‑bay configuration, can be shipped within 7‑10 working days for design validation.

Sample fees are credited toward the first order if the customer proceeds to mass production. Shipping terms are EX Works or FOB Shanghai, with insurance optional upon request.

Frequently Asked Questions

• Can dimensions be customized? Yes, width, depth, and height are adjustable within the ranges listed in the customization parameters.
• What information is required before quotation? A rough sketch or CAD layout showing desired width, height, and any special accessories (drawers, lighting, mirrors).
• What materials are available for shelves? Standard is E1 grade particle board with melamine laminate; alternatives include MDF, plywood, or solid wood upon request.
• How is quality inspected? Each batch undergoes dimensional, mechanical load, and coating adhesion checks as outlined in the quality assurance section.
• What packaging methods are available? Flat‑pack cartons with foam protection; palletized options for bulk orders.
• How are export shipments protected? Cartons are stretch‑wrapped on pallets, with humidity indicators and corner guards.
• What is the typical production lead time? 18‑22 working days for standard configurations; samples within 7‑10 working days.
• How are samples arranged? Request a sample via the contact form; shipping costs are prepaid and credited upon order confirmation.

Get a Quote

To begin the quotation process, please provide your project dimensions, preferred material finishes, and any accessory requirements. Our engineering team will review the details and return a detailed proposal with pricing and lead time.