Custom Closet with Island and Vanity

A custom closet with island and vanity integrates storage, workspace, and grooming functions into a single coordinated unit. The design addresses the need for efficient use of floor space while maintaining clear circulation paths.

Ergonomic considerations dictate island height between 900 mm and 950 mm to accommodate seated and standing tasks. Minimum clearance of 600 mm around the island ensures unobstructed movement and door swing.

Substrate options include 18 mm MDF with melamine finish or 25 mm particleboard with PVC edge banding, selected based on load requirements and humidity exposure. Hardware specifies full‑extension ball‑bearing slides rated for 40 kg dynamic load per drawer.

• 18 mm MDF, melamine‑covered, suitable for dry interior environments
• 25 mm moisture‑resistant particleboard, PVC‑wrapped edges for humid zones
• Optional 16 mm tempered glass shelves with polished edges for display areas

Structural framework uses 50 mm × 50 mm steel studs with powder‑coat finish, providing lateral rigidity and supporting island loads up to 250 kg. Panel thickness is calibrated to limit deflection to less than 2 mm under a 150 kg uniform load.

Vanity top thickness is set at 20 mm for quartz or 25 mm for solid surface, with a 150 mm overhang to accommodate sink hardware. Pre‑drilled holes for plumbing follow standard 38 mm drain and 15 mm supply spacing.

Customization encompasses overall dimensions (width 1200 mm–3000 mm, depth 600 mm–800 mm, height 2100 mm–2400 mm), door styles (sliding, hinged, bifold), hardware finishes (chrome, brushed nickel, matte black), and integrated lighting (LED strips with 3000 K–4000 K color temperature).

• Width adjustments in 50 mm increments to match wall studs
• Door panel thickness options: 16 mm, 18 mm, 22 mm
• Soft‑close hinges or push‑to‑open mechanisms
• Interior accessories: pull‑out baskets, valet rods, jewelry trays

Typical applications include master bedrooms in residential properties, boutique hotel suites, and high‑end rental apartments where personalized storage and grooming space add market value.

The product fits these environments by consolidating clothing storage, folding surfaces, and vanity functions, reducing the need for separate furniture pieces and improving floor‑plan efficiency.

Quality assurance includes dimensional verification (±2 mm), adhesion testing of finishes (cross‑hatch method, rating 5B), and load testing of slides and hinges to 150 % of rated capacity before shipment.

Frequently Asked Questions

To discuss your specific requirements or request a detailed quote, please contact our engineering team via the inquiry form.